Differences

This shows you the differences between two versions of the page.

--- user:kurser:ham_vt2023_l7 [2023/04/22 15:30] – Added segment on driven and parasitic elements. user
+++ user:kurser:ham_vt2023_l7 [2023/04/22 19:52] – user
@@ Line 53: / Line 53: @@
   * Quad
   * Waveguide slot
+  * Ground plane antenna (GP-antenna)
+  * Horn antenna
   * Spiral/Helical
   * Vivaldi
@@ Line 75: / Line 77: @@
   * Directivity, D, dBi, dBd
   * Antenna gain
-  * Far-field distance = d_f > 2*D^2/lambda, given d_f >> D, d_f >> lambda
+  * Far-field distance = d_f > 2*D^2/λ, given d_f >> D, d_f >> λ
-  * Radiation efficiency, eta
+  * Radiation efficiency, η
   * Radiation pattern, E & H patterns
   * Polarisation and x-pol suppression
@@ Line 93: / Line 95: @@
 ==Direction==
-The most ideal antenna is a single charge floating in free space, radiating as a sphere in all directions. Such a single charge is known academically as an //isotropic radiator//. Practically, antennas are real objects and thus not single charges, meaning that the "radiation sphere" (made-up word) is very much not a sphere. Most antennas only //illuminate// (actual term) a smaller part of that hypothetic sphere, meaning that most of the EM field is sent/recieved from/to the antenna at that specific direction in space.
+The most ideal antenna is a single charge floating in free space, radiating as a sphere in all directions. Such a single charge is known academically as an //isotropic radiator//. Practically, antennas are real objects and thus not single charges, meaning that the "radiation sphere" (made-up word) is very much not a sphere. Most antennas only //illuminate// (actual term) a smaller part of that hypothetic sphere, meaning that most of the EM field is sent/recieved from/to the antenna at that specific direction in space. The illuminated area is known as the //beam area// (SE: ??).
-How small that illuminated segment of the sphere is, is known as the //antenna directivity//. The directivity is often given in dB with respect to that ideal //isotropic radiator//. The unit is thus **dBi**. A very large part of an antenna's design specification, is its directivity. Different types of antennas have very different directivities.
+How small that illuminated segment of the sphere is as opposed to size the entire sphere, is known as the //antenna directivity//. The directivity is often given in dB with respect to that ideal //isotropic radiator//. The unit is thus **dBi**. A very large part of an antenna's design specification, is its directivity. Different types of antennas have very different directivities.
-A higher directivity means that more of the emitted/recieved field is sent through a smaller portion of that sphere around the antenna. The antenna is in a way "pointing more" towards one direction. A high directivity thus means that the antenna is very good as emitting/receiving to that specific direction. And as a drawback, the antenna become worse at emitting/receiving in every other direction.
+A higher directivity means that more of the emitted/recieved field is sent through a smaller portion of that sphere around the antenna. The antenna is in a way "pointing more" towards one direction. A high directivity thus means that the antenna is very good as emitting/receiving to that specific direction. And as a drawback, the antenna becomes worse at emitting/receiving in every other direction.
 \\
@@ Line 115: / Line 117: @@
 The direction with the highest directivity of the antenna, is known as the //main lobe// (SE: huvudloben). Thus, the smaller lobes are known as //sidelobes// (SE: sidolober). The main lobe in practice defines which way the antenna is pointing.
-Simple antennas, like a monopole antenna, only have a single lobe. Very complex antennas, may have lobes that are shaped practically in any way imaginable. Example: an antenna in a satellite orbiting above a nation, might have an antenna with a lobe pattern that is shaped according to the borders of that nation. The antenna is thus good at transmitting/receiving to/from that nation, and worse at transmitting/receiving to/from locations outside of that nation's borders. In practice, it is very hard to design an antenna with such a complicated lobe pattern. Companies approach this problem for instance using evolutional AI algorithms that brute-force designs until the lobe pattern is achieved. Another very common approach, is to make a very large array of antennas, and control the phase of the signal reaching each antenna, in order to achieve a more complicated lobe pattern.
+Simple antennas, like a monopole antenna, only have a single lobe. Very complex antennas, may have lobes that are shaped practically in any way imaginable. Example: an antenna in a satellite orbiting above a nation, might have an antenna with a lobe pattern (SE: strålningsdiagram) that is shaped according to the borders of that nation. The antenna is thus good at transmitting/receiving to/from that nation, and worse at transmitting/receiving to/from locations outside of that nation's borders. In practice, it is very hard to design an antenna with such a complicated lobe pattern. Companies approach this problem for instance using evolutional AI algorithms that brute-force designs until the lobe pattern is achieved. Another very common approach, is to make a very large array of antennas, and control the phase of the signal reaching each antenna, in order to achieve a more complicated lobe pattern.
@@ Line 124: / Line 126: @@
 The resulting lobe pattern from the driven element, is then by-design usually deformed using other elements that are in fact not connected to the cable that fed the antenna. All elements on the antenna that are not driving the EM wave, are known as parasitic elements (SE: parasitelement).
-These parasitic elements have different purposes. They could be used to direct the lobe pattern into some wanted direction; such elements are known as //directors// (SE: direktorer). Or, those elements could be to block off the lobe pattern from emitting/reciving into some direction; such elements are known as //reflectors// (SE: reflektorer).
+These parasitic elements have different purposes. They could be used to direct the lobe pattern into some wanted direction; such elements are known as //directors// (SE: direktorer). Or, those elements could be to block off the lobe pattern from emitting/receiving into some direction; such elements are known as //reflectors// (SE: reflektorer).
 Example: the Yagi-Uda antenna, has one driven element on its boom. To get the signal pointing forwards, three dipole directors are mounted at the front of the antenna. And to get the lobe pattern pointing less backwards, a reflector is mounted at its back.
 In practice, reflectors are usually checkerboard-shaped meshes of wires.
+\\
+==A stricter definition of directivity==
+The directivity of an antenna, is the maximum transmitted power in the main lobe, divided by the average power transmitted across the entire sphere. From this ratio, we may derive that the directivity D = (4*pi) / (beam area).
+\\
+==How wide is a lobe?==
+    * TODO: -3 dB point (SE: halvvärdesbredd)\\
+    * TODO: The angle spanned by the circular segment, defines the //beamwidth// of the lobe (SE: öppningsvinkel).\\
+\\
+==Gain and antenna efficiency==
+In a datasheet, you will typically find an entry for //gain// (SE: antennvinst). Different sources will have different opinions on what is the gain of the antenna. Here, we choose to define the antenna gain as the //power gain// of the antenna. The power gain G is related to the directivity of the antenna as\\
+G = η * D
+... where η is the so-called efficiency factor of the antenna. In practice, there will be unexpected ohmic losses in the antenna, leading to an η that is smaller than 1.
+It is thus useful to discuss a real antenna in terms of its gain, rather than in terms of its theoretical directivity.
+\\
+==Emitted power: p.e.p. and e.i.r.p==
+The HAM radio band plan sets radiation emission limits in terms of power, either as **p.e.p.** or **e.i.r.p.** (peak emitted power, equivalent isotropic radiated power).
+  * The p.e.p. limit defines how much peak power may be fed into your antenna.
+  * The e.i.r.p. limit takes antenna gain into account as well, meaning that no lobe may peak above a certain power.
+\\
+//**POSSIBLE EXAM QUESTION**//
+\\
+In the 5.3515-5.3665 MHz band, a HAM radio operator may at most transmit with 15 W e.i.r.p. Are you allowed to transmit at 5.36 MHz with 10 W using a +3 dB gain directional antenna?
+\\
+\\
+Answer: No, this is not allowed. An antenna with +3 dB gain, would make a 10 W radiated emission seem as if we're transmitting with 20 W, which is above the e.i.r.p. limit.
+\\
+//**POSSIBLE EXAM QUESTION**//
+\\
+In the 1850-1900 kHz band, a HAM radio operator may at most transmit with 10 W p.e.p. Are you allowed to transmit at 1875 kHz with 10 W using a +20 dB gain directional antenna?
+\\
+\\
+Answer: Yes, this is allowed, since p.e.p. sets the limit of how much power is fed into the antenna, and does not account for directivity.
@@ Line 146: / Line 191: @@
 Some antennas transmit mainly using the electric field, some transmit mainly using the magnetic field, and some use both. Let's imagine an antenna with an electric (E) field that is vertically polarised, and a magnetic (H) field that is horisontally polarised. Let's describe the E field like a cosine with some phase, and the H field like a sine with some phase. If we stand directly in front of where the antenna is pointing, we could see both the cosine and sine waves like composants in a complex vector. As time progresses, and the E cosine goes up/down while the H sine goes left/right, that complex vector would be spinning around in a circle as time progresses. This type of polarisation is known as a circular polarisation; the emitted/received EM field is in a way "spinning around" in a circle.
-Circular polarisation is common in public FM radio broadcast (rundradio). The advantage is that the receiver can be rotated at almost any direction with respect to the ground, and still be somewhat optimal to the transmitter. Another example is in satellite-to-Earth orientation.
+Circular polarisation is common in public FM radio broadcast (SE: rundradio). The advantage is that the receiver can be rotated at almost any direction with respect to the ground, and still be somewhat optimal to the transmitter. Another example is in satellite-to-Earth transmissions.
-Common misconception: even though many circularly-polarised antennas are shaped like round objects, it is not necessary to have a round antenna to create circular polarisation. The circular polarisation itself stems from the E and H field composants spinning a complex vector around in a circle, with respect to the direction of the propagating EM wave.
+Common misconception: even though many circularly-polarised antennas are shaped like round objects, it is not necessary to have a round antenna to create circular polarisation. The circular polarisation itself stems from the E and H field composants spinning a complex vector around in a circle, with respect to the direction of the propagating EM wave. This effect is achievable using two antenna elements rotated 90 degrees like an "X", and then phase-shifting the fed signal to one of the antenna elements with 90 degrees.
@@ Line 155: / Line 200: @@
 TODO
+\\
+== Antenna impedance matching ==
+TODO
+\\
+==Far-field==
+All commonly used formulas related to antennas, assume simplifications that happen once we are standing at a large distance away from the antenna.
+\\
+The far-field distance = d_f > 2*D^2/lambda, given d_f >> D, d_f >> lambda.
+Meaning, that for very high frequencies, our simplifications and thus our formulas, are valid already fairly close to the antenna. The opposite of the far-field is known as the near-field, where most of our formulas stop being valid, and in practice the behaviour of the antenna has to be numerically simulated.