ETAwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===Pinouts===
Dessa är de kontakteringarna som gäller för ETA-CAN, med flera.\\
RJ11 rekomenderas för nya installationer för att vara kompatibel med open CAN. CAN distributer och dess pinnout finns här https://github.com/ETAChalmers/CAN-Distributor

==DB9==
[[DB9|{{user:eta-can:dsub9-pinout.jpg?350x200}}]]
|Pin #	|Signal| Names|
|1	|Reserved	|Upgrade Path|
|2	|CAN_L		|Dominant Low|
|3	|CAN_GND	|Ground|
|4	|Reserved	|Upgrade Path|
|5	|CAN_SHLD	|Shield, Optional|
|6	|GND		|Ground, Optional|
|7	|CAN_H		|Dominant High|
|8	|Reserved	|Upgrade Path|
|9	|CAN_V+	        |Power, Optional|


==4P Micro-Match AUML==

|Pin #	|Signal| Names|
|1	|CAN_GND     |Ground|
|2 	|V_CAN       |Power, Optional|
|3 	|CAN_L       |Dominant Low|
|4 	|CAN_H       |Dominant High|

==5P XLR ETA==

|Pin #	|Signal| Names|
|1	|CAN_H		|Dominant High|
|2 	|CAN_L		|Dominant Low|
|3 	|NC      ||
|4 	|CAN_GND	|Ground|
|5 	|CAN_V+	        |Power, Optional|

==RJ45==
| Pin #  | Signal    | Names                 |
| 1      | CAN_H     | Dominant High         |
| 2      | CAN_L     | Dominant Low          |
| 3      | CAN_GND   | Ground                |
| 4      | Reserved  | Upgrade Path          |
| 5      | Reserved  | Upgrade Path          |
| 6      | CAN_SHLD  | CAN Shield, Optional  |
| 7      | CAN_GND   | Ground                |
| 8      | CAN_V+    | Power, Optional       |

==RJ10==
|Pin #	|Signal| Names|
|1				|CAN_V+	    |Power, Optional|
|2				|CAN_H		|Dominant High|
|3				|CAN_L		|Dominant Low|
|4				|CAN_GND	|Ground|

==10P-Header==
|Pin #	|Signal| Names|
|1	|Reserved	|Upgrade Path|
|2	|GND		|Ground, Optional|
|3	|CAN_L		|Dominant Low|
|4	|CAN_H		|Dominant High|
|5	|CAN_GND	|Ground|
|6	|Reserved	|Upgrade Path|
|7	|Reserved	|Upgrade Path|
|8	|CAN_V+	|Power, Optional|
|9	|Reserved	|Upgrade Path|
|10	|Reserved	|Upgrade Path|