This is an old revision of the document!
Pinouts
Dessa är de kontakteringarna som gäller för ETA-CAN, med flera.
DB9 rekomenderas vid nya installationer, delvis för att vi har många.
==DB9==
|Pin # |Signal| Names|
|1 |Reserved |Upgrade Path|
|2 |CAN_L |Dominant Low|
|3 |CAN_GND |Ground|
|4 |Reserved |Upgrade Path|
|5 |CAN_SHLD |Shield, Optional|
|6 |GND |Ground, Optional|
|7 |CAN_H |Dominant High|
|8 |Reserved |Upgrade Path|
|9 |CAN_V+ |Power, Optional|
==4P Micro-Match AUML==
|Pin # |Signal| Names|
|1 |CAN_GND |Ground|
|2 |V_CAN |Power, Optional|
|3 |CAN_L |Dominant Low|
|4 |CAN_H |Dominant High|
==5P XLR ETA==
|Pin # |Signal| Names|
|1 |CAN_H |Dominant High|
|2 |CAN_L |Dominant Low|
|3 |NC ||
|4 |CAN_GND |Ground|
|5 |CAN_V+ |Power, Optional|
==RJ45==
| Pin # | Signal | Names |
| 1 | CAN_H | Dominant High |
| 2 | CAN_L | Dominant Low |
| 3 | CAN_GND | Ground |
| 4 | Reserved | Upgrade Path |
| 5 | Reserved | Upgrade Path |
| 6 | CAN_SHLD | CAN Shield, Optional |
| 7 | CAN_GND | Ground |
| 8 | CAN_V+ | Power, Optional |
==RJ10==
|Pin # |Signal| Names|
|1 |CAN_V+ |Power, Optional|
|2 |CAN_H |Dominant High|
|3 |CAN_L |Dominant Low|
|4 |CAN_GND |Ground|
==10P-Header==
|Pin # |Signal| Names|
|1 |Reserved |Upgrade Path|
|2 |GND |Ground, Optional|
|3 |CAN_L |Dominant Low|
|4 |CAN_H |Dominant High|
|5 |CAN_GND |Ground|
|6 |Reserved |Upgrade Path|
|7 |Reserved |Upgrade Path|
|8 |CAN_V+ |Power, Optional|
|9 |Reserved |Upgrade Path|
|10 |Reserved |Upgrade Path|